MSV Racing’s OptiFlo 7º High Flow CR500 Coolant Elbow

Description

So what is the big deal about the MSV Racing coolant elbow vs stock or other billet OEM elbow replicas?

Through 4 different design enhancements over the OEM and billet replicas we were able to design an elbow that dominates them with +1 PSI reduction in backpressure = .954 AVG GPM more coolant flow.

So, what are the 4 design changes?

·         The FIRST BIG reason it dominates the OEM and OEM billet replicas! Fully radiused interior VS sharp 90* turn with minor corner fillet. The 7* elbow has a fully radiused interior profile which, as a result, causes a dramatically smoother flow, relieves back PSI, and reduces aeration.

·         The SECOND BIG reason it dominates the OEM and OEM billet replicas! Elbow to cylinder coolant port aligned correctly VS misaligned from the factory. The 7* Elbow outlet port is shifted and aligned “correctly” to the cylinder inlet port reducing turbulence/aeration and smoothing flow VS misaligned from the factory.

·         The THIRD BIG reason it dominates the OEM and OEM billet replicas! Pivoted to point directly at the H20 pumps discharge port VS spigot not in line with the H20 pump port. The 7* Elbow inlet spigot is pivoted to point directly at the H20 pumps discharge port VS OEM and OEM billet replicas spigot not pointing at H20 pump discharge port. Boosting cooling system efficiency.

·         The FOURTH BIG reason it dominates the OEM and OEM billet replicas! Spigots lead in profile is tapered VS Squared edge. The 7º Elbow has a 6mm 3º lead in taper. This lead-in taper maintains a smooth laminar flow as it transitions from the hose to the elbow’s inlet reducing turbulence/aeration and backpressure.

These are now available in shiny billet, silver (cast look), or Military Spec (MIL-A-8625) red Anodized, and black Anodized.

Viton (OEM size) O-Ring provided.

Replaces 12103-ML3-680 JOINT, WATER HOSE and 91356-GC4-731 O-RING

Additional information

Weight 0.1125 lbs
Dimensions 4 × 2 × 2 in
Color

Red, Shiny, Silver, Black

Make/Brand

,

Model

, , , , , , , , , , , ,

Reviews

There are no reviews yet.

Be the first to review “MSV Racing’s OptiFlo 7º High Flow CR500 Coolant Elbow”

Your email address will not be published. Required fields are marked *

$89.99

  • Secure Transaction

Description

So what is the big deal about the MSV Racing coolant elbow vs stock or other billet OEM elbow replicas?

Through 4 different design enhancements over the OEM and billet replicas we were able to design an elbow that dominates them with +1 PSI reduction in backpressure = .954 AVG GPM more coolant flow.

So, what are the 4 design changes?

·         The FIRST BIG reason it dominates the OEM and OEM billet replicas! Fully radiused interior VS sharp 90* turn with minor corner fillet. The 7* elbow has a fully radiused interior profile which, as a result, causes a dramatically smoother flow, relieves back PSI, and reduces aeration.

·         The SECOND BIG reason it dominates the OEM and OEM billet replicas! Elbow to cylinder coolant port aligned correctly VS misaligned from the factory. The 7* Elbow outlet port is shifted and aligned “correctly” to the cylinder inlet port reducing turbulence/aeration and smoothing flow VS misaligned from the factory.

·         The THIRD BIG reason it dominates the OEM and OEM billet replicas! Pivoted to point directly at the H20 pumps discharge port VS spigot not in line with the H20 pump port. The 7* Elbow inlet spigot is pivoted to point directly at the H20 pumps discharge port VS OEM and OEM billet replicas spigot not pointing at H20 pump discharge port. Boosting cooling system efficiency.

·         The FOURTH BIG reason it dominates the OEM and OEM billet replicas! Spigots lead in profile is tapered VS Squared edge. The 7º Elbow has a 6mm 3º lead in taper. This lead-in taper maintains a smooth laminar flow as it transitions from the hose to the elbow’s inlet reducing turbulence/aeration and backpressure.

These are now available in shiny billet, silver (cast look), or Military Spec (MIL-A-8625) red Anodized, and black Anodized.

Viton (OEM size) O-Ring provided.

Replaces 12103-ML3-680 JOINT, WATER HOSE and 91356-GC4-731 O-RING

Additional information

Weight 0.1125 lbs
Dimensions 4 × 2 × 2 in
Color

Red, Shiny, Silver, Black

Make/Brand

,

Model

, , , , , , , , , , , ,

Reviews

There are no reviews yet.

Be the first to review “MSV Racing’s OptiFlo 7º High Flow CR500 Coolant Elbow”

Your email address will not be published. Required fields are marked *