This sleeve will easily change Camber and/or Caster 1.50˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free between the stud and sleeve, determine the change needed and replace the existing sleeve with the correct one. SPC 4169 spanner socket required for sleeve r emoval. Rotate sleeve to further fine tune Camber/Caster adjustment.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
- Easily adjusts camber / caster in vehicles equipped with DANA 44 or GM 10 bolt axles
- Front Adjustment Range: Camber/Caster ±1.50°
- Front Adjustment Range: Camber/Caster ±1.50˚
- Recommended Tools: 4169 - Spanner Wrench
- Required: 1 per wheel
|
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Ltl Freight Required: false |
| Prop 65: Y |
| Part Type: automotive |
| Epa: N/A |
| Carb Acknowledgement Required: false |
| Regular Stock: t |
| Units Per Sku: 1 |
