ProClassic Crimp-On hose ends make custom hose fabrication easy. Simply cut the hose, push together the hose and fitting and crimp! Their lightweight collar design is engineered by size for precise compression ensuring proper end attachment with Russell manual crimper and appropriate crimper die. Replacement collars are available in the event you want to re-use the hose end on a different assembly. They are available in -4 through -12 sizes and are packaged complete with collar. Crimper and dies sold separately.
Straight ProClassic Crimp On Hose End; Black/Silver; -8AN;
Verify hose series, hose size, AN size, and fitting angle before assembly. Cut hose cleanly, assemble the hose end according to instructions, and confirm the hose is fully seated. After installation, route away from heat, sharp edges, and moving components, then pressure check for leaks.
- Crimp-On Fittings Are Not Interchangeable W/Other Brands
- For use with Russell ProClassic Hoses
- Light Weight Crimp Hose End Design
|
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Ltl Freight Required: false |
| Prop 65: Y |
| Part Type: automotive |
| Epa: N/A |
| Carb Acknowledgement Required: false |
| Regular Stock: false |
| Clearance Item: t |
| Units Per Sku: 1 |
