Description
We are the only company to offer the RM250 stator wire rubber grommet. This allows you to replace your old crusty OEM rubber grommet with a high-quality replacement.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 4 × 4 × 4 in |
MSV Racing ’96-’06 RM250 Stator Wire Grommet
$24.99
- Brand: RM250, Suzuki
- Category: Wire Grommets
- Tags:
Description
We are the only company to offer the RM250 stator wire rubber grommet. This allows you to replace your old crusty OEM rubber grommet with a high-quality replacement.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 4 × 4 × 4 in |
2 reviews for MSV Racing ’96-’06 RM250 Stator Wire Grommet
-
I am restoring my 2007 RM250 and needed to replace the Stator Grommet. The only way to obtain a new Grommet is to purchase a complete Stator Assembly. MSV to the rescue with this high quality rubber grommet. You will have to de-pin the connector, which is super easy with a blunt tip pick. If you have a 6 wire Stator Cable, put 2 wires (Yellow and Black w/ White Stripe) through the center hole and the remaining wires in the other 4 holes. Use some Silicone or Dielectric grease to help push/pull the wires. I am installing a Panthera E-Start that requires Transmission fluid in this side so I needed to have a water tight seal. To further help seal, I filled the boot and slot of the grommet with Optimum Black RTV before installing. To finish it up, I applied heavy duty shrink wrap over the boot and PVC Cable sleeve. If you are restoring an RM this is a must have part.
-
Excellent products at affordable costs. Very high quality and I’m extremely satisfied, the shipping was like lightning, very fast. Thank you for offering superior products at affordable costs.
Lou (verified owner) –
I am restoring my 2007 RM250 and needed to replace the Stator Grommet. The only way to obtain a new Grommet is to purchase a complete Stator Assembly. MSV to the rescue with this high quality rubber grommet. You will have to de-pin the connector, which is super easy with a blunt tip pick. If you have a 6 wire Stator Cable, put 2 wires (Yellow and Black w/ White Stripe) through the center hole and the remaining wires in the other 4 holes. Use some Silicone or Dielectric grease to help push/pull the wires. I am installing a Panthera E-Start that requires Transmission fluid in this side so I needed to have a water tight seal. To further help seal, I filled the boot and slot of the grommet with Optimum Black RTV before installing. To finish it up, I applied heavy duty shrink wrap over the boot and PVC Cable sleeve. If you are restoring an RM this is a must have part.
Austin Barnhouse (verified owner) –
Excellent products at affordable costs. Very high quality and I’m extremely satisfied, the shipping was like lightning, very fast. Thank you for offering superior products at affordable costs.